
Drain Cleaning
Slow, gurgling or backed-up drains in kitchens, bathrooms and basements.
Lukewarm showers, a wet spot under the tank or a heater that bangs when it fires. We find what failed, tell you honestly whether it's worth fixing and give you a flat price before any work. Our office on 185th Street serves Tinley Park homeowners 24/7.

Here's what Tinley Park homeowners usually notice first:
A heater that can't keep up may have sediment taking up space, a failing element or a burner that isn't firing fully.
A drip from a valve or fitting can usually be fixed. Water from the tank body means the tank is done.
Sediment on the bottom of the tank pops as the burner heats through it.
A worn thermocouple or flame sensor shuts the gas off. It's one of the most common repairs we make.
The median Tinley Park home was built in 1987. Tank water heaters last about 8 to 12 years, so many homes here have replaced the original heater more than once.
Subdivisions built in the same few years tend to replace water heaters around the same time too. If your neighbors are replacing theirs, check the date on yours.
Homes built for families run laundry, dishwashers and back-to-back showers. A heater sized for the original household may be working past its limit.
Midway Airport averages about 5 nights a year at or below zero. Incoming water is coldest then, so the heater runs longest, and a weak one gives out.
We work on the water heaters found in Tinley Park homes: standard gas tanks, power-vent models, electric units and tankless heaters in basements, laundry rooms and garages. Every visit starts with a diagnosis before any recommendation.
Not sure what you have? Look at the label on the side of the tank. It shows the fuel, the size and when it was made. Read it to us when you call. If you're ready for a new one, see water heater installation.
A yearly flush drains the sediment that collects at the bottom of every tank. Left alone, it makes the heater slower, louder and shorter-lived. During a maintenance visit, we also check the anode rod, the relief valve and the burner or elements.
Most manufacturers suggest flushing about once a year, and tankless units need regular descaling. If your heater has never been flushed and it's more than a few years old, start there before assuming it needs replacing.
You want a diagnosis, not a sales pitch. Here's how we work.
We test the heater before recommending anything. If a part fixes it, we'll say so.
What each option costs and how long each should last.
You get one number before work starts, and we clean up after.

4.7 stars from 5,669+ Google reviews across all J. Blanton locations.
"The guys did a great job. Andrew and Enrique were able to figure out the issue quickly and move me towards a reasonable solution. Kyle came out the next day and finished the work efficiently. Appreciate them a lot and will continue doing business with them in the future!"
"Lou was very professional and his experience shows. He took a quick look at our broken hot water heater, saw a dirty component and knew right away that replacing the part would solve the problem. Thanks Lou!"
"Christian came out today, even though it was passed 5 he still made the trip. Super friendly and got the water heater taken care of quick."
Tank heaters typically last about 8 to 12 years. Tankless units often last longer.
Tank heaters typically last about 8 to 12 years, and tankless units often last longer with regular descaling. If yours is close to that age and acting up, a repair may not be worth it.
A leaking tank means replace. A failed part on a younger heater is usually a repair.
If the tank is leaking, it needs replacing. If a part failed and the heater is under about 8 years old, a repair usually makes sense. If the repair would cost a big share of a new heater, we'll tell you.
Either a valve, which is a repair, or the tank, which means replacement.
A dripping drain valve or relief valve is a repair. A tank that's corroded through means replacement. Shut off the water to the heater and call. We'll tell you which one it is.
It depends on the part and the heater. You get a flat price first.
It depends on what failed, the heater type and the parts it needs. We diagnose first and give you a flat-rate price before any work begins.
About once a year for a tank flush. Tankless units need regular descaling.
Most manufacturers recommend flushing a tank heater about once a year and descaling tankless units regularly. An annual check also catches a worn anode rod or a sticky relief valve early. See water heater maintenance.
Annual Protection Plan
Most plumbing problems start small. The No Drip Club brings a J. Blanton plumber to your home for regular maintenance, so small issues get caught before they turn into big repairs.


Slow, gurgling or backed-up drains in kitchens, bathrooms and basements.

Tree roots, cracked pipe and repeat backups in the line from your house to the street.

Repair, replacement and battery backups for the pumps that keep your basement dry and drain a basement bathroom.

Running toilets, leaky faucets and new fixture installs for kitchens and bathrooms.

Repair for frozen or burst pipes, from basement water lines to outdoor spigots.

Burst pipes, sewer backups and no hot water, any time of day or night.
Our Tinley Park office is at 8200 185th St, Suite G28, and our phone line is open 24/7.
We also serve Orland Park, Oak Forest, Frankfort, Country Club Hills, Matteson, Homer Glen, Midlothian and more.