
Drain Cleaning
Slow, gurgling or backed-up drains in kitchens, bathrooms and basements.
A dripping faucet, a new kitchen faucet or a full set of fixtures for a remodel. We repair and install faucets and fixtures in kitchens, bathrooms and laundry rooms, with a flat price before we start. Serving Highland Park and the North Shore.

Most faucet problems start small. Here's when to call:
A worn cartridge, washer or seal is the usual cause. A steady drip wastes more water than most people think.
If one faucet is weak and the rest are fine, the aerator or cartridge may be clogged. If every faucet is weak, it may be the pipes.
Water in the cabinet usually comes from a supply line, a shutoff valve or the faucet base. Catch it before it damages the cabinet.
Stiff, wobbly or grinding handles mean worn internal parts. Sometimes a repair, sometimes it's time for a new faucet.
The kitchen faucet gets more use than any other fixture in the house. We repair drips, leaks, weak spray and loose handles, and we install new kitchen faucets, including pull-down and pull-out models, faucets with side sprayers and filtered water taps.
A new faucet is also a good time to replace the shutoff valves and supply lines under the sink. In older homes, those valves may not have been turned in years, and they're often the part that fails. We'll check them and tell you if they need replacing.

Beyond the faucet, we handle the rest of the plumbing in your kitchen: sink drains and traps, dishwasher hookups, ice maker lines, garbage disposals and gas lines for ranges. For a remodel, we can move or add fixtures so the plumbing matches your new layout.
If your kitchen sink is clogged, see drain cleaning. For disposal problems, see garbage disposal repair. For a new gas range, see gas line installation.
We install sinks, faucets, toilets, showerheads, tub spouts, laundry sinks and outdoor spigots, whether you're replacing one fixture or doing a full remodel. Every install includes the connections, shutoff valves and a leak check before we leave.
Buying your own fixtures? That's fine. Tell us the make and model when you call and we'll let you know if anything about your plumbing needs to change to fit it. For toilets, see toilet installation. For showers, see shower repair.
Nearly half of Highland Park homes were built before 1960. Older plumbing behind a new faucet can be the difference between a quick swap and a surprise.
Shutoff valves that haven't been turned in decades can seize or start leaking the moment they're used. We check them first and replace them if they won't hold.
Older galvanized water lines can narrow with corrosion, which shows up as low pressure at new faucets. We'll tell you if the fixture or the pipe is the problem.
A faucet job should be simple. Here's how we keep it that way.
Your plumber explains what's wrong in plain English first, then walks you through your options. You decide.
You get a flat-rate price before we touch anything, with no surprise add-ons when the job is done.
Shoe covers on, work area protected, and the space cleaned up before we leave.

4.9 stars from 47 Google reviews for our Highland Park office.
"We received Prompt assessment & repair within 24 hours of calling. We appreciate Anthony, he was professional, knowledgeable & repaired sink pipe, valves & bath tub faucets efficiently."
"Andrew A was friendly, efficient and did a thorough job fixing our bathtub faucet. Called in the night before and he was there the next morning and fixed everything within 2 hours. Would definitely reach out again if needed and ask for Andrew's assistance."
"He rodded out the kitchen sink drain piping and fixed the leaks... In the end he offered us an excellent maintenance plan, which will definitely save us money and headaches in the future."
A worn part on a good faucet is a repair. An old or corroded faucet is usually a replacement.
If it's a worn cartridge, washer or seal on a good-quality faucet, a repair usually makes sense. If the faucet is old, corroded or parts are hard to find, replacing it is often the better value. We'll tell you which one we'd pick.
Yes. Tell us the make and model and we'll confirm it fits.
Yes. Tell us the make and model when you call. We'll check that it fits your sink and plumbing and let you know if anything needs to change.
Check the aerator first. If every faucet is low, it may be older pipes.
Check the aerator first, since debris often gets trapped there after install. If pressure is low at every faucet, older galvanized pipes narrowed by corrosion may be the cause.
It depends on the faucet and your plumbing. You get a flat price before any work begins.
It depends on the faucet, the sink, the condition of the shutoff valves and supply lines, and access. We give you a flat-rate price before any work begins.
Annual Protection Plan
Most plumbing problems start small. The No Drip Club brings a J. Blanton plumber to your home for regular maintenance, so small issues get caught before they turn into big repairs.


Slow, gurgling or backed-up drains in kitchens, bathrooms and basements.

Tree roots, cracked clay pipe and repeat backups in the line from your house to the street.

Repair and replacement for tank and tankless water heaters that leak, make noise or run out of hot water too fast.

Sump pump repair, replacement and battery backups to keep your basement dry through heavy rain and snowmelt.

Repair for pipes that froze or burst, from basement water lines to outdoor spigots.

Gas line repair, leak detection and gas fireplace service.

Burst pipes, sewer backups and no hot water, any time of day or night.
Our Highland Park office is at 1904 Green Bay Rd B, and our phone line is open 24/7.
We also serve Highwood, Fort Sheridan, Deerfield, Bannockburn, Riverwoods, Lake Forest, Lake Bluff, Glencoe and more.