The most common causes of stubborn clogs in drains are built-up debris, grease, hair, soap scum, and mineral deposits. To effectively remove them during the drain cleaning process, plumbers typically use methods such as snaking the drain with an auger, using a drain snake or drain cleaning tool, hydro jetting to blast away the clog with high-pressure water, or using chemical drain cleaners as a last resort.

As a licensed plumber, some cost-effective options for upgrading faucets without replacing the entire fixture include:<br /><br />1. Installing new faucet handles or knobs.<br />2. Replacing the aerator for improved water flow and efficiency.<br />3. Upgrading to a new spout or nozzle for a fresh look.<br />4. Adding a faucet cover or plate to conceal any existing wear or damage.<br />5. Applying a fresh coat of paint or finish to the existing faucet for a quick refresh.

As a licensed plumber, you can tell if there is a gas line leak in your home or property by looking for the following signs:<br /><br />1. Rotten egg smell<br />2. Hissing or whistling sounds near gas lines<br />3. Dead plants or vegetation near the gas line<br />4. Bubbles in standing water<br />5. Higher than usual gas bills

A video camera sewer and drain inspection can help identify issues in your plumbing system by allowing a licensed plumber to visually inspect the inside of your pipes. This technology can reveal blockages, leaks, cracks, tree root intrusions, and other potential problems that may not be visible from the outside. This helps in accurately diagnosing issues and determining the most effective solutions for repairs or maintenance.

To ensure a smooth toilet installation process without damage to your bathroom flooring or plumbing system, follow these steps:<br /><br />1. Turn off the water supply to the toilet.<br />2. Remove the old toilet carefully to avoid damaging the flooring or plumbing.<br />3. Inspect the flange and replace if damaged.<br />4. Install a new wax ring properly to create a watertight seal.<br />5. Secure the toilet to the floor evenly to prevent rocking.<br />6. Connect the water supply line and check for leaks.<br />7. Test the toilet for proper flushing and sealing.<br />8. Caulk around the base of the toilet to prevent water damage.<br />9. Clean up any mess and dispose of old materials properly.